Configurazione Switch CISCO

Identificare gli switch presenti nel rack

sw-Rack-3#show switch

Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1  Master 0006.f601.c780 10 3  Ready
2   Member a44c.112f.2d00 5  3  Ready

Controllate le VLAN disponibili e identificare quella nella quale dovrà finire il server PVE (tipicamente Management), comprese le porte

sw-Rack-3#show vlan
VLAN Name
Status Ports
---- -------------------------------- --------- -------------------------------
1 default
active Gi1/0/2, Gi1/0/8, Gi1/0/9, Gi1/0/10, Gi1/0/11, Gi1/0/12, Gi1/0/13, Gi1/0/14, Gi1/0/15, Gi1/0/16, Gi1/0/17
Gi1/0/18, Gi1/0/19, Gi1/0/20, Gi1/0/21, Gi1/0/22, Gi1/0/23, Gi1/0/24, Gi1/0/25, Gi1/0/26, Gi1/0/27
Gi1/0/28, Gi1/0/29, Gi1/0/30, Gi1/0/31, Gi1/0/32, Gi1/0/33, Gi1/0/34, Gi1/0/35, Gi1/0/36, Gi1/0/37
Gi1/0/38, Gi1/0/39, Gi1/0/40, Gi1/0/41, Gi1/0/42, Gi1/0/43, Gi1/0/44, Gi1/0/45, Gi1/0/46, Gi1/0/48, Gi1/1/1
Gi1/1/2, Gi1/1/3, Gi1/1/4, Te1/1/2, Gi2/0/1, Gi2/0/2, Gi2/0/8, Gi2/0/9, Gi2/0/10, Gi2/0/11, Gi2/0/12
Gi2/0/13, Gi2/0/14, Gi2/0/15, Gi2/0/16, Gi2/0/17, Gi2/0/18, Gi2/0/19, Gi2/0/20, Gi2/0/21, Gi2/0/22
Gi2/0/23, Gi2/0/24, Gi2/0/25, Gi2/0/26, Gi2/0/27, Gi2/0/28, Gi2/0/29, Gi2/0/30, Gi2/0/31, Gi2/0/32
Gi2/0/33, Gi2/0/34, Gi2/0/35, Gi2/0/36, Gi2/0/37, Gi2/0/38, Gi2/0/39, Gi2/0/40, Gi2/0/41, Gi2/0/42
Gi2/0/43, Gi2/0/44, Gi2/0/45, Gi2/0/46, Gi2/0/47, Gi2/0/48, Gi2/1/1, Gi2/1/2, Gi2/1/4, Te2/1/2

11 VLANVersoTutto
active

902 Management
active Gi1/0/1, Gi1/0/4, Gi1/0/7, Gi1/0/47, Gi2/0/4, Gi2/0/7

Verificare le interfacce in trunk

sw-Rack-3#show interface trunk
Port    Mode    Encapsulation Status    Native vlan
Te1/1/1 on      802.1q        trunking  199
Gi2/1/3 on      802.1q        trunking  199
Te2/1/1 on      802.1q        trunking  199
Po1     on      802.1q        trunking  199
Po2     on      802.1q        trunking  199

Port    Vlans allowed on trunk
Te1/1/1 1-4094
Gi2/1/3 1-4094
Te2/1/1 1-4094
Po1 1-4094
Po2 1-4094

Port
Vlans allowed and active in management domain
Te1/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Gi2/1/3 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Te2/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Po1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Po2 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009

Port
Vlans in spanning tree forwarding state and not pruned
Te1/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Gi2/1/3 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Te2/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Po1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
Po2 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009

Se, ad esempio, volessimo configurare le porte Gi1/0/8-Gi2/0/8 per l'IDRAC e le porte Gi1/0/9-Gi2/0/9 per PVE

# Verificare la configurazione delle varie interfacce
show running-config interface gigabitEthernet 1/0/9

# Creazione portchannel per PVE

switch# configure terminal
switch(config)# interface gigabitEthernet 1/0/9
switch(config-if)# channel-group 3 mode active
switch(config)# interface gigabitEthernet 2/0/9
switch(config-if)# channel-group 3 mode active
switch(config)# interface port-channel 3
switch(config-if)# description PVE
switch(config-if)# switchport trunk encapsulation dot1q
switch(config-if)# switchport trunk native vlan 199
switch(config-if)# switchport mode trunk
sw-Rack-3(config-if)#write

sw-Rack-3(config-if)#do show run int gi2/0/9

sw-Rack-3(config-if)#do show run int gi1/0/9

sw-Rack-3(config-if)#do show run int port-channel 3

Aggiungere le porte dell'IDRAC alla VLAN 902

switch# configure terminal
sw-Rack-3(config)#interface gigabitEthernet 1/0/8
sw-Rack-3(config-if)#description IDRAC_PVE
sw-Rack-3(config-if)#switchport mode access
sw-Rack-3(config-if)#switchport access vlan 902
sw-Rack-3(config-if)#exit

sw-Rack-3(config)#interface gigabitEthernet 2/0/8
sw-Rack-3(config-if)#description IDRAC_DR_PVE
sw-Rack-3(config-if)#switchport mode access
sw-Rack-3(config-if)#switchport access vlan 902
sw-Rack-3(config-if)#exit
sw-Rack-3(config)#do write

Al termine, impostare IP statico all'IDRAC

4.6 KiB Raw Blame History

Configurazione Switch CISCO

4.6 KiB

Raw Blame History