configurazione sw e cambio passwd idrac

pve/001-update-idrac.md

@@ -118,3 +118,7 @@ root@debian:~# flashboot /root/Bootloaders/x64sas2.rom
 ```
 
 - Entrare nel BIOS, tipicamente premendo F2, e ripristinare le voci precedentemente modificate
+
+> Infine, cambiare la password dell'utente root
+
+![root-passwd](asset/img/root-passwd.png)

pve/005-switch-config.md

@@ -0,0 +1,121 @@
+# Configurazione Switch CISCO
+
+- Identificare gli switch presenti nel rack
+
+```sh
+sw-Rack-3#show switch
+
+Switch# Role Mac Address Priority Version State
+----------------------------------------------------------
+*1  Master 0006.f601.c780 10 3  Ready
+2   Member a44c.112f.2d00 5  3  Ready
+```
+
+- Controllate le VLAN disponibili e identificare quella nella quale dovrà finire il server PVE (tipicamente Management), comprese le porte
+
+```sh
+sw-Rack-3#show vlan
+VLAN Name
+Status Ports
+---- -------------------------------- --------- -------------------------------
+1 default
+active Gi1/0/2, Gi1/0/8, Gi1/0/9, Gi1/0/10, Gi1/0/11, Gi1/0/12, Gi1/0/13, Gi1/0/14, Gi1/0/15, Gi1/0/16, Gi1/0/17
+Gi1/0/18, Gi1/0/19, Gi1/0/20, Gi1/0/21, Gi1/0/22, Gi1/0/23, Gi1/0/24, Gi1/0/25, Gi1/0/26, Gi1/0/27
+Gi1/0/28, Gi1/0/29, Gi1/0/30, Gi1/0/31, Gi1/0/32, Gi1/0/33, Gi1/0/34, Gi1/0/35, Gi1/0/36, Gi1/0/37
+Gi1/0/38, Gi1/0/39, Gi1/0/40, Gi1/0/41, Gi1/0/42, Gi1/0/43, Gi1/0/44, Gi1/0/45, Gi1/0/46, Gi1/0/48, Gi1/1/1
+Gi1/1/2, Gi1/1/3, Gi1/1/4, Te1/1/2, Gi2/0/1, Gi2/0/2, Gi2/0/8, Gi2/0/9, Gi2/0/10, Gi2/0/11, Gi2/0/12
+Gi2/0/13, Gi2/0/14, Gi2/0/15, Gi2/0/16, Gi2/0/17, Gi2/0/18, Gi2/0/19, Gi2/0/20, Gi2/0/21, Gi2/0/22
+Gi2/0/23, Gi2/0/24, Gi2/0/25, Gi2/0/26, Gi2/0/27, Gi2/0/28, Gi2/0/29, Gi2/0/30, Gi2/0/31, Gi2/0/32
+Gi2/0/33, Gi2/0/34, Gi2/0/35, Gi2/0/36, Gi2/0/37, Gi2/0/38, Gi2/0/39, Gi2/0/40, Gi2/0/41, Gi2/0/42
+Gi2/0/43, Gi2/0/44, Gi2/0/45, Gi2/0/46, Gi2/0/47, Gi2/0/48, Gi2/1/1, Gi2/1/2, Gi2/1/4, Te2/1/2
+
+11 VLANVersoTutto
+active
+
+902 Management
+active Gi1/0/1, Gi1/0/4, Gi1/0/7, Gi1/0/47, Gi2/0/4, Gi2/0/7
+```
+
+- Verificare le interfacce in `trunk`
+
+```sh
+sw-Rack-3#show interface trunk
+Port    Mode    Encapsulation Status    Native vlan
+Te1/1/1 on      802.1q        trunking  199
+Gi2/1/3 on      802.1q        trunking  199
+Te2/1/1 on      802.1q        trunking  199
+Po1     on      802.1q        trunking  199
+Po2     on      802.1q        trunking  199
+
+Port    Vlans allowed on trunk
+Te1/1/1 1-4094
+Gi2/1/3 1-4094
+Te2/1/1 1-4094
+Po1 1-4094
+Po2 1-4094
+
+Port
+Vlans allowed and active in management domain
+Te1/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Gi2/1/3 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Te2/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Po1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Po2 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+
+Port
+Vlans in spanning tree forwarding state and not pruned
+Te1/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Gi2/1/3 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Te2/1/1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Po1 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+Po2 1,10-12,111,199,250,321,337,348,501,710,731,800-803,842-843,900-910,972,997-999,1942,4000-4009
+```
+
+![sw-config](asset/img/sw-config.png)
+
+- Se, ad esempio, volessimo configurare le porte Gi1/0/8-Gi2/0/8 per l'IDRAC e le porte Gi1/0/9-Gi2/0/9 per PVE
+
+```sh
+# Verificare la configurazione delle varie interfacce
+show running-config interface gigabitEthernet 1/0/9
+
+# Creazione portchannel per PVE
+
+switch# configure terminal
+switch(config)# interface gigabitEthernet 1/0/9
+switch(config-if)# channel-group 3 mode active
+switch(config)# interface gigabitEthernet 2/0/9
+switch(config-if)# channel-group 3 mode active
+switch(config)# interface port-channel 3
+switch(config-if)# description PVE
+switch(config-if)# switchport trunk encapsulation dot1q
+switch(config-if)# switchport trunk native vlan 199
+switch(config-if)# switchport mode trunk
+sw-Rack-3(config-if)#write
+
+sw-Rack-3(config-if)#do show run int gi2/0/9
+
+sw-Rack-3(config-if)#do show run int gi1/0/9
+
+sw-Rack-3(config-if)#do show run int port-channel 3
+```
+
+- Aggiungere le porte dell'IDRAC alla VLAN 902
+
+```sh
+switch# configure terminal
+sw-Rack-3(config)#interface gigabitEthernet 1/0/8
+sw-Rack-3(config-if)#description IDRAC_PVE
+sw-Rack-3(config-if)#switchport mode access
+sw-Rack-3(config-if)#switchport access vlan 902
+sw-Rack-3(config-if)#exit
+
+sw-Rack-3(config)#interface gigabitEthernet 2/0/8
+sw-Rack-3(config-if)#description IDRAC_DR_PVE
+sw-Rack-3(config-if)#switchport mode access
+sw-Rack-3(config-if)#switchport access vlan 902
+sw-Rack-3(config-if)#exit
+sw-Rack-3(config)#do write
+```
+
+> Al termine, impostare IP statico all'IDRAC